Excellent Abrasion Resistant Hexagonal Meshes

Hexagonal mesh is also known as hex metal, hex metal grating, hex steel mesh, Hex steel grill or hex steel grid. Metal Hex grid provides surface framework for reinforcement of the refractory or concrete material in linings. They are made of pressed strips riveted to each other to form the hexagonal apertures.

Hex metal refractory lining is a hexagonal cellular mesh grating specifically designed for reinforcing both linings and flooring. The hex steel mesh acts as a surface framework to hold cement or refractory in position, and relieves stress in the lining's upper crust, which prevents spalling and cracking. As a result of hex metal's strength and unique design, abrasion and corrosion are retarded and refractory life is significantly extended. Even hot gaseous substances cannot erode the refractory because they are reflected away from the surface by the metal cellular grid.

Specifications:
Thickness: 1.2cm - 2.5cm.
Hole Shape: Tortoise.
Excellency: Hexagon Big Mud Claw Tortoise Shell Mesh reinforces effectively.
Anchor ability and interlink strength with liner material. It can prevent the layer break from anti-heat and heat preservation, thus enhancing the unite strength of liner.

Materials: A General Carbon Steel, A3, OCr13, 1Cr13, 0Cr18Ni9, 1Cr18Ni9Ti , Cr25Ni20 SUS304 SUS316.

Features of hex metal: protecting refractory  materials, corrosion and abrasion resistance, high temperature stability.

Application:

As refractories, hex steel mesh has Flexibility, high strength and erosion resistant characteristics. Hex steel mesh  is an excellent choice of refractory linings in furnaces, reactors, cyclones, ducts and flues. It is mainly used in power plant, cement plant, Steel, petroleum, chemical industry, power generation and other large devices.  The hex metal can largely improve the heat erosion and abrasion resistance.
Hex mesh used for floors, hex mesh provides long term protection for armor applications in industrial floors. Specifically: Loading docks, ramps, high traffic aisles for forklifts and trucks, hot floors for foundry, forge and steel mills, refuse disposal plant floors and almost anywhere floors are subject to severe impact and rolling loads will benefit with Hex mesh.
Since Hex Metal's flexibility allows it to be rolled, it easily conforms to circular shapes. It is ideal for lining Ducts, Furnaces, Reactor Vessels, Cyclones, Flue Gas Lines and other high temperature equipment of virtually any shape or configuration. Hex metal and flex metal refractory linings are both flexible, mesh grating used in reinforcing linings, floors and any cement structures needing added support.

Wire Mesh for Helideck

Helideck mesh is a steel safety net system specifically manufactured for the perimeter structure of helideck, but it is not suitable for the application of anti-skid helicopter landing deck mesh.

The material of helideck mesh:

Stainless steel wire materials like 304, 304L, 316, and 316L. Those materials are highly corrosion resistant, acid and alkali resistant, wear resistant and have high tensile strength and long service life. Therefore, they are mainly applied to the offshore helidecks.
Galvanized wire material, and this material is mainly used for normal helideck application.
The types of helideck mesh:

Chain link mesh

A hand hold a part of stainless steel chain link mesh, which has bright surface and pretty structure.
Stainless steel chain link mesh are common material for helideck mesh.

A part of the PVC coated chain link mesh with safe ends.
The PVC coated chain link helideck mesh can better resist the corrosion of the sea water.

Cable mesh

A part of the cable mesh without ferrules, just the cable wires go through each other.
This is the best material for helideck mesh, because it is highly corrosion resistant in offshore environment.

A part of the cable mesh with ferrules to joint cable wires together.
This kind of cable mesh is the most common type for helideck mesh with strong structure.

Specifications:

Wire diameter: 1mm - 4mm.
Mesh size (W × H): 25 × 40mm - 200 × 350mm.
Surface treatment: PVC coated, galvanized, no surface treatment.
Roll size: customized are also available.
Features:

High pressure resistant.
Easily assembled.
Eco friendly.
Durable and corrosion resistant.
Long service life.
Application:

A Corner of the helideck mesh with chain link wire mesh bonded to the steel frame
The steel frame can best support the helideck mesh and ensure the stable structure.

A part of the helideck mesh with cable mesh bonded to the steel frame.
Cable meshes are strong and highly corrosion resistant to be used in the sea water.

Decorative Woven Wire Mesh for Buildings and Hotels

The decorative woven wire mesh is widely used in the residences, hotels, exhibition halls and other places to supply the aesthetic sense. It has various type and different sizes for choice. In the below, there are several types of common decorative woven wire mesh types. If there is not the type you want, you can tell me and we will supply the products according to your requirements and drawings.

We have a full line of woven wire mesh products suited for design and architectural applications. Woven wire mesh is ideal for architectural applications to provide decorative enhancements and functionality.

Coil drapery
Coil drapery is a kind of light mesh with round woven wire and small openings. It can be made to curtains, partitions, ceilings and wall decorations.

The coil mesh is ideal for indoor decorative screens for hotel, exhibition hall and also for the private residences.

Surface treatment of the coil drapery
For more suitable different applications, there are various colors for choice. There are three main surface treatments to let the coil drapery more attractive and colorful.

Lacquer coating. Lacquer coating is cheaper than other surface treatment.
Anodic oxidation. It is better processing and looks better than the lacquer coating. But it is only for the aluminum alloy wire.
Acid washing. it is suitable for the stainless steel wire. After washing from acid, the metal drapery is very light.
Specifications

Material: stainless steel wire, bronze wire, copper wire and aluminum alloy.
Wire diameter: 0.8mm – 1.2mm.
Aperture size: 4mm – 30mm.
Width: max. 6000mm.
Length: no limit.
Color: various colors for choice, such as the bronze, ebony black, purplish red and other colors.
Terms Diameter (mm) Aperture (mm) Thickness (mm)
DWCD-01 0.8 4 3.6
DWCD-02 0.8 5 3.6
DWCD-03 0.8 6 3.6
DWCD-04 0.8 8 3.6
DWCD-05 0.8 9 3.6
DWCD-06 1.0 4 3.6
DWCD-07 1.0 5 3.6
DWCD-08 1.0 6 3.6
DWCD-09 1.0 8 3.6
DWCD-10 1.0 9 3.6
DWCD-11 1.0 10 3.6
DWCD-12 1.0 20 3.6
DWCD-13 1.2 4 3.6
DWCD-14 1.2 5 3.6
DWCD-15 1.2 6 3.6
DWCD-16 1.2 8 3.6
DWCD-17 1.2 9 3.6
DWCD-18 1.2 10 3.6
DWCD-19 1.2 20 3.6
DWCD-20 1.2 30 3.6
A piece of copper coil drapery on the black background.
Copper coil drapery.

A piece of aluminum alloy coil drapery on the black background.
Aluminum alloy coil drapery.

Applications

The coil drapery can be used as room divider, Curtain, Partition, Background, Wall & Ceiling treatment, Window treatment, Visual merchandising, Exterior cladding, Shade, and other interior & exterior decoration.
The coil drapery is widely used in hotels, cafe shops, bars, museums, opera houses, concert halls, office buildings, exhibition halls, shopping malls and air access station.
Copper coil drapery is hanging on the ceiling.
Coil drapery can be used in the ceiling in the hotels and buildings.

A coil drapery curtain hanging on the wall and a piano on the beside of it.
Coil drapery can be used as decorative curtain for the concert hall.

Cable mesh
Cable mesh is woven from metal rods or metal cable and use of the materials including stainless steel, and high strength corrosion-resistant chromium and other metal wires. The cable rope can maintain the stiffness and high strength. The cable mesh has unlimited durability, which can bear the stress and deformation without damage.

Specifications

Material: stainless steel, chromium and other metal.
Cable diameter: 0.45mm – 3mm.
Cable quantity: 2 – 4.
Rod diameter: 0.5mm – 4mm.
Mesh colors: Silver, gold, gunmetal, gray, blue, red, etc.
Terms Diameter (mm) Aperture (mm) Thickness (mm)
DWCD-01 0.8 4 3.6
DWCD-02 0.8 5 3.6
DWCD-03 0.8 6 3.6
DWCD-04 0.8 8 3.6
DWCD-05 0.8 9 3.6
DWCD-06 1.0 4 3.6
DWCD-07 1.0 5 3.6
DWCD-08 1.0 6 3.6
DWCD-09 1.0 8 3.6
DWCD-10 1.0 9 3.6
DWCD-11 1.0 10 3.6
DWCD-12 1.0 20 3.6
DWCD-13 1.2 4 3.6
DWCD-14 1.2 5 3.6
DWCD-15 1.2 6 3.6
DWCD-16 1.2 8 3.6
DWCD-17 1.2 9 3.6
DWCD-18 1.2 10 3.6
DWCD-19 1.2 20 3.6
DWCD-20 1.2 30 3.6
A piece of cable mesh decorative woven wire mesh with two line cables. in the warp
Two line cable wire in the warp direction.

A piece of cable decorative woven wire mesh with three line cables in the warp.
Three line cable wire in the warp direction.

Application

Cable mesh is widely used in building elevation, room dividers, ceilings, shades, balconies and corridors.
Cable mesh can be used in the hotels, museums, opera houses, concert halls, office buildings, exhibition halls, shopping malls and other high grade places for the internal and external decorations.
Cable mesh is installed on the outside of the buildings.
Cable mesh can be used in the interior and exterior of the buildings for decoration.

Cable decorative wire mesh is installed on the railings.
Cable decorative wire mesh can be used in the railings for decoration and protection.

Other types of decorative woven wire mesh
There are various other types of decorative woven wire mesh, they all have various applications and specifications. You can refer to it and contact us to get the complete information about them.

A piece of decorative woven wire mesh with stainless steel round wire in weft and cable in warp.
DWO-01 decorative woven wire mesh.

A piece of decorative woven wire mesh with cable cross below and bottom round wire.
DWO-02 decorative woven wire mesh.

A piece of decorative woven wire mesh with round wire in weft and flat wire in warp.
DWO-03 decorative woven wire mesh.

A piece of decorative woven wire mesh with flat wire in weft and round wire in warp.
DWO-04 decorative woven wire mesh.

A piece of decorative woven wire mesh with plain weave flat wire.
DWO-05 decorative woven wire mesh.

A piece of copper decorative woven wire mesh with double pre-crimped flat wire.
DWO-06 decorative woven wire mesh.

Woven Mesh Test Sieves - Lab Sampling and Analysis

Woven mesh test sieves are made of stainless steel, brass and bronze woven mesh and the stainless steel or brass frames. Commonly sieves are round.

Woven mesh test sieves are supplied in complete range of aperture sizes, diameter sizes, depths, choice of materials, certified degrees of inspection to meet virtually every requirement.

Test sieves should be used with care, cleaned regularly and stored in a safe dry place. To avoid chemical corrosion, we recommend the stainless steel sieves for most lab test sieves and grading sieving material.

Test sieves can be used in various applications, such as laboratory test sieves, metallurgy, abrasive, construction industries and research lab for precise classification of minute granule materials.

There are some special woven mesh test sieves.

Half height sieves
It can be used in the analysis of smaller quantities of samples. These are available in diameter of 100mm, 200mm or 300mm and 3", 8", 12".
Wet washing sieves
Extremely useful sieves can be used where samples need to be separated with the help of wet washing. They are available in 8" diameter and 4" or 8" deep. The frames of the sieves are brass or stainless steel.
Extra depth sieves
Extra depth sieves are commonly used in the construction and cement industries. The sieves are available in a diameter size of 450mm and the depth is 300mm.
A piece of half height test sieve and a pan.
Half-height woven mesh test sieve is used for analysis of smaller quantity materials.

A wet washing woven mesh test sieve with a mesh panel on the white background.
Wet washing woven mesh test sieve is available in 4" or 8" deep.

Specifications

Sieve mesh materials: stainless steel, brass and phosphor bronze.
Frame material: stainless steel and brass, larger diameter sieves also available in galvanized steel.
Aperture size: from 125mm down to 20μm.
Wire diameter: 0.02mm to 6.3mm.
Outer sieves diameter size: 38mm, 100mm, 150mm, 200mm, 250mm, 300mm, 315mm, 400mm, 450mm, 3", 8", 10", 12", 18".
Depth: 1", 1-1/2", 1-5/8", 1.625", 2", 3", 3-1/2", 3.25", 4", 4.25", 6", 8".
Depth type: full height and half height.
Certified degree: ASTM and ISO Standards.
A unit of stainless steel woven mesh test sieves on the white background.
Stainless steel woven mesh test sieves.

A unit of brass woven mesh test sieves on the white background.
Brass woven mesh test sieves.

Features

Corrosive resistance. Stainless steel has outstanding corrosive resistance performance, so the stainless steel test sieves can be used in the chemical and other corrosive environments or can analysis the corrosive materials.
Various apertures for choice. There are wide range of apertures and diameters for choice, which can fit requirements of majority customers.
Customizable. We can supply all kinds of standard test sieves; the special sized sieves can be customized.
Certified: These are the most widely used test sieves and are manufactured to a National or International Specification.
Applications

Woven wire sieves are most widely used for all types of laboratory sampling and particle size analysis. For example the pharmacy testing.
The test sieves is mainly used in metallurgy, abrasive, construction industries.
Woven wire sieves can be used as grading sieves, sifting sieves, sand screening and grain sieves.
A piece of woven mesh test sieve on the ground with soil and grass roots on the sieve.
Woven mesh test sieve can be used as sifting sieve to separate soils.

A unit of woven mesh test sieves with rice and other grains on it.

Printing screen – High Tension, Low Elongation for Accurate Print

Printing screen is commonly made of polyester mesh or stainless steel wire mesh. Compared with the polyester mesh, the stainless steel woven wire cloth for printing has high tension, low elongation and excellent chemical, solvent corrosion resistance performance.

The weaving method of printing screen is plain weave, twill weave an dutch weave. Plain weave printing screen is the most commonly used type. The roll width is commonly 40", 48" and 60" while the length is commonly 100'. It can be customized according to your requirements.

The stainless steel printing screen can be standard stainless steel mesh and ultra thin stainless steel mesh. See the following introduction and decide which one is suitable for you.

Types of printing screen
Standard stainless steel mesh.
Plain weave stainless steel mesh has uniform wire diameter, consistent mesh thickness, even mesh openings and smooth surface. It is suitable for printing applications where requires fine pattern printing with high accuracy. Standard stainless steel mesh is widely used in micro-circuit manufacturing, silk, glass, china and other high end applications.
Three rolls of stainless steel mesh on the table and a small coil stainless steel wire on the screen.
PM-01: Stainless steel mesh has bright surface and corrosion resistance material.Three rolls of stainless steel meshes on the table and a detection tool on the screen.
PM-02: Stainless steel mesh has even and precious mesh openings for high accuracy.
Ultra thin super stainless steel mesh.
Compared with standard stainless steel mesh, ultra thin supper stainless steel mesh has smaller wire diameter and bigger opening area. Additional, it has high tensile strength, little elongation, good deposit uniformity and good release of paste to be used in highly accurate fine line printing applications.
A hand is holding a piece of ultra thin super stainless steel mesh and we can see the finger clearly.
PM-03: Ultra thin stainless steel printing screen is high transparency.A piece of ultra thin printing screen is placed on the company brochure.
PM-04: Ultra thin printing screen has high tension and low elongation performance.
Operating principles of printing screen
Screen printing is a printing technique that uses stainless steel woven wire cloth or polyester mesh to support an ink-blocking stencil. The attached stencil forms open areas of mesh that transfer ink or other printable materials which can be pressed through the mesh as a sharp-edged image onto a substrate. A roller or squeegee is moved across the screen stencil, forcing or pumping ink past the threads of the woven mesh in the open areas.

Screen printing is also a stencil method of print making in which a design is imposed on a screen of silk or other fine mesh, with blank areas coated with an impermeable substance, and ink is forced through the mesh onto the printing surface. It is also known as silkscreen and serigraph.

Specifications of printing screen

Material: stainless steel 304, 316, 304L, 316L, 310S, 430, 317L, 904L.
Weaving method: plain weave, twill weave and dutch weave.
Mesh: 80 mesh to 400 mesh.
Wire diameter: 18 micron to 120 micron.
Thickness: 28 micron to 230 micron.
Width: 40", 48", 60 " and customized.
Length: standard is 100'.
Table 1: Common Specs of Stainless Steel Printing Screen
Item Mesh/Inch Wire Dia.
(μm) Opening (μm) Open Area
(%) Thickness
(μm) Through Ink
(cm3/m2) Calender Thickness
(μm)
PS-01 80 × 80 90 228 52 198–207 103.0 168–170
PS-02 80 × 80 120 198 39 276–288 92.9 228–230
PS-03 100 × 100 100 154 36.8 230–240 77.2 188–190
PS-04 120 × 120 80 132 39 184–192 65.8 148–150
PS-05 150 × 150 60 109 41.7 138–144 50.0 138–142
PS-06 165 × 165 45 109 50.1 95–104 45.1 78–80
PS-07 165 × 165 50 104 45.6 110–115 45.6 88–90
PS-08 180 × 180 45 96 46.4 99–104 41.5 78–80
PS-09 180 × 180 50 91 42 115–120 41.7 88–90
PS-10 200 × 200 40 87 46.9 81–82 43.0 68–70
PS-11 200 × 200 50 77 37 115–120 42.0 88–90
PS-12 230 × 230 35 75 46.7 72–76 37.0 50–67
PS-13 250 × 250 30 72 49.7 63–64 30.0 48–49
PS-14 250 × 250 35 67 43 76–78 32.0 59–61
PS-15 250 × 250 40 62 49.7 82–86 34.0 50–80
PS-16 270 × 270 35 59 39.4 76–80 30.0 58–70
PS-17 290 × 290 20 68 41.7 43–44 18.4 29–30
PS-18 300 × 300 30 55 38 66–68 28.0 40–59
PS-19 325 × 325 23 55 49.8 49–53 25.4 38–39
PS-20 325 × 325 28 50 41.2 63–64 26.4 50–51
PS-21 325 × 325 30 48 38 66–68 24.0 40–59
PS-22 350 × 350 25 48 43 52–54 18.7 41–50
PS-23 400 × 400 18 46 51.3 36–40 20.0 28–30
PS-24 400 × 400 23 41 40.7 50–54 19.0 35–48
Advantages of stainless steel printing screen

Uniform wire diameter.
Consistent mesh thickness.
Evenly tension weaves.
High tension.
Super precision. Fine wire diameter and even mesh opening ensures high precision.
High flexibility. The printing mesh will not lose elasticity at extreme tension.
Low elongation. Very small elongation of printing screen at high tension.
High corrosion resistance. Stainless steel printing mesh has better corrosion resistance than the polyester fiber.
Good heat-melting resistance. Stainless steel printing mesh is suitable for heat-melting ink.
Great solvent resistance. It can prevent various solvents from corroding printing mesh and ensure the safety of printing screen.
A glass printing machine on the white background.
PM-05: Printing screen is high flexibility for glass printing.A textile printing machine with four extensions on the white background.
PM-06: Printing screen is high precision for textile printing.
Applications of stainless steel printing screen

LEP shielding mesh.
Micro-circuit manufacturing.
Textile printing.
Ceramics printing.
Glass printing.
A lady is holding a purple silk muffler with flowers on the muffler.
PM-07: Printing screen for silk printing.Several tableware with blue and white porcelain pattern on the table.
PM-08: Printing screen for ceramic printing.
Three glass decoration with scenery patterns are hanging on the wall.
PM-09: Printing screen for glass printing.A circuit board is placed on the table.

Shielding Screen - RFI and EMI Shielding Screen Mesh

Shielding screen has outstanding resistance to the radiation, static and electromagnetism, so they are widely used in the commercial, industrial, military and laboratory. The shielding screen has outstanding shielding performance to the RFI and EMI. The RFI refers to radio frequency interference and the EMI refers to electromagnetic interference.

Shielding material
Shielding screen is mainly made of stainless steel wire and copper wire.
Stainless steel. The stainless steel is mainly for the SUS 316.
Copper. The copper is mainly the pure copper, also it is called red copper. The red copper has 99.98% copper. It is very soft, so it is easy to cut and form.

Shielding screen weaving method
The weaving method of the shielding screen is plain weave, which is used for the majority of the woven wire cloth. Each warp wire crosses above and below each weft wire. And each weft wire crosses above and below each warp wire.

Shielding screen features
Outstanding shielding function to the radiation, static and electromagnetism.
Shielding for the RFI and EMI.
Excellent fire and corrosion resistance.
Various applications.
Shielding screen application
Shielding screen mesh is widely used to protect key equipment from RFI and EMI. The earliest example of this is Faraday cage.

The shielding screen mesh can be used in the laboratory for the electrophysiology, confocal microscopy to protect against static and electromagnetic waves.
The shielding screen can be used for the military to protect battlefield tactic system, communication system and computers.
The shielding screen can be used for the industry purpose to protect test chambers, computer rooms and indeed recording rooms.
The shielding is also used in many public information displays such as airport display boards as well as rail and bus terminals.
Other applications include telecommunications, test measurement equipment, navigation, medical and radar applications.
Some peoples will do the Faraday cage by themselves to prevent the radiation from the Wi-Fi and other places.
A Faraday cage made of copper shielding screen is on the table with a confocal microscopy in it and a computer screen hanging on outside of the cage.
Shielding screen can be used in the laboratory to protect against static and electromagnetic waves.

A Faraday cage made of stainless steel shielding screen is on the floor and a simplified bed in the cage.
Shielding screen can be used as Faraday cage to protect people from disturbing from the radiation and wifi signal.

Specifications of Shielding Screen
Mesh Wire Opening Width Open area Binding Weight Material
(warp) (weft) (warp) (weft)
  (mm) (mm) (mm) (mm) (%) (kg / m2)
50 50 0,030 0,030 0,478 1220 89 plain 0,023 AISI 316
80 80 0,030 0,030 0,288 1220 82 plain 0,036 AISI 316
100 100 0,028 0,030 0,226 1220 79 plain 0,040 AISI 316
50 50 0,030 0,030 0,478 1220 89 plain 0,023 copper
75 75 0,030 0,030 0,309 1220 83 plain 0,034 copper
80 80 0,030 0,030 0,288 1220 82 plain 0,036 copper
100 100 0,056 0,056 0,198 1220 61 plain 0,158 copper

Corrosion Resistant Fly Mesh Insect Mesh

Durable Fly Mesh Prevents the Passage of Insects.
Close view of the plain weave wire mesh screen.
Our fly mesh is the most suitable choice to keep the flies, mosquitoes, wasps, moths and other insects out of your room. What ever the size and shape of your windows, you can buy our mesh first, then cut them into the size you need, just using your household scissors is OK.
https://www.wovenwirecloth.org/wovenwire/fly-mesh-insect-screen.html
Below are the detailed specifications of our fly mesh:

Roll dimension: width - 1m/1.2m; length - 30m, 50m, 100m.
Mesh count (opening/inch): 16 × 16.
Wire diameter: 0.22mm / 0.0087" / 34 gauge.
Aperture (opening size): 1.36mm / 0.0535".
Open rate: 73.8%.
Weaving standard: ISO/TS 9002:2016.
Material: Stainless steel fly mesh
Detailed structure of the plain weave fly mesh.
Plain woven stainless steel fly mesh has stable structure, also called insect mesh.A hand is holding a corner of the stainless steel wire mesh.
Our fly mesh can prevent the insects out while don’t block the sunshine.
Features:

Anti-rust and corrosion resistant, which support a long life span more than 5 years.
Can be easily cut into the size and shape by household scissors.
Material: Epoxy coating fly mesh
Closed-edge epoxy coating fly mesh.
Epoxy coating layer helps the wire away from the rust and corrosion.Metal fly mesh keeps the flies out.
Anti-rust insect screen insures you a clean and healthy environment.
Features:

Lower cost than stainless steel fly mesh.
Safety coating layer without the rusty spots.
Material: Galvanized fly mesh
Galvanized wire mesh on the hand.
Electro-galvanized fly mesh with bright surface and rust resistant feature.A pair of scissors are cutting the fly mesh.
Our fly mesh can be easily cut by the household scissors.
Material: Aluminum fly mesh
A roll of aluminum wire mesh.
Aluminum wire mesh has lighter weight than other material.A caliper is measuring the insect screen opening size.
Our standard fly mesh is 16 mesh count with 13.5mm opening size.
Features:

Much lighter weight than other metal material
Clean surface without rusty spots.
Application:

Window screen in the red frame.
Our fly mesh is the best choice as the window screen.Aluminum insect screen on the window frame.
Aluminum window screen can prevent the passage of flies.
Pleating process:
We can also provide the pleating service if request.

A pack of stainless steel pleated wire mesh.
If you need the wire mesh to be pleated, please tell us the details request.Pleated wire mesh structure on the paper.
Pleated depth is needed if the wire mesh need this process.
Large scale inventory quantity meet all your need!

Large quantity of wire mesh rolls are stocked in our warehouse.