Excellent Abrasion Resistant Hexagonal Meshes

Hexagonal mesh is also known as hex metal, hex metal grating, hex steel mesh, Hex steel grill or hex steel grid. Metal Hex grid provides surface framework for reinforcement of the refractory or concrete material in linings. They are made of pressed strips riveted to each other to form the hexagonal apertures.

Hex metal refractory lining is a hexagonal cellular mesh grating specifically designed for reinforcing both linings and flooring. The hex steel mesh acts as a surface framework to hold cement or refractory in position, and relieves stress in the lining's upper crust, which prevents spalling and cracking. As a result of hex metal's strength and unique design, abrasion and corrosion are retarded and refractory life is significantly extended. Even hot gaseous substances cannot erode the refractory because they are reflected away from the surface by the metal cellular grid.

Specifications:
Thickness: 1.2cm - 2.5cm.
Hole Shape: Tortoise.
Excellency: Hexagon Big Mud Claw Tortoise Shell Mesh reinforces effectively.
Anchor ability and interlink strength with liner material. It can prevent the layer break from anti-heat and heat preservation, thus enhancing the unite strength of liner.

Materials: A General Carbon Steel, A3, OCr13, 1Cr13, 0Cr18Ni9, 1Cr18Ni9Ti , Cr25Ni20 SUS304 SUS316.

Features of hex metal: protecting refractory  materials, corrosion and abrasion resistance, high temperature stability.

Application:

As refractories, hex steel mesh has Flexibility, high strength and erosion resistant characteristics. Hex steel mesh  is an excellent choice of refractory linings in furnaces, reactors, cyclones, ducts and flues. It is mainly used in power plant, cement plant, Steel, petroleum, chemical industry, power generation and other large devices.  The hex metal can largely improve the heat erosion and abrasion resistance.
Hex mesh used for floors, hex mesh provides long term protection for armor applications in industrial floors. Specifically: Loading docks, ramps, high traffic aisles for forklifts and trucks, hot floors for foundry, forge and steel mills, refuse disposal plant floors and almost anywhere floors are subject to severe impact and rolling loads will benefit with Hex mesh.
Since Hex Metal's flexibility allows it to be rolled, it easily conforms to circular shapes. It is ideal for lining Ducts, Furnaces, Reactor Vessels, Cyclones, Flue Gas Lines and other high temperature equipment of virtually any shape or configuration. Hex metal and flex metal refractory linings are both flexible, mesh grating used in reinforcing linings, floors and any cement structures needing added support.

Wire Mesh for Helideck

Helideck mesh is a steel safety net system specifically manufactured for the perimeter structure of helideck, but it is not suitable for the application of anti-skid helicopter landing deck mesh.

The material of helideck mesh:

Stainless steel wire materials like 304, 304L, 316, and 316L. Those materials are highly corrosion resistant, acid and alkali resistant, wear resistant and have high tensile strength and long service life. Therefore, they are mainly applied to the offshore helidecks.
Galvanized wire material, and this material is mainly used for normal helideck application.
The types of helideck mesh:

Chain link mesh

A hand hold a part of stainless steel chain link mesh, which has bright surface and pretty structure.
Stainless steel chain link mesh are common material for helideck mesh.

A part of the PVC coated chain link mesh with safe ends.
The PVC coated chain link helideck mesh can better resist the corrosion of the sea water.

Cable mesh

A part of the cable mesh without ferrules, just the cable wires go through each other.
This is the best material for helideck mesh, because it is highly corrosion resistant in offshore environment.

A part of the cable mesh with ferrules to joint cable wires together.
This kind of cable mesh is the most common type for helideck mesh with strong structure.

Specifications:

Wire diameter: 1mm - 4mm.
Mesh size (W × H): 25 × 40mm - 200 × 350mm.
Surface treatment: PVC coated, galvanized, no surface treatment.
Roll size: customized are also available.
Features:

High pressure resistant.
Easily assembled.
Eco friendly.
Durable and corrosion resistant.
Long service life.
Application:

A Corner of the helideck mesh with chain link wire mesh bonded to the steel frame
The steel frame can best support the helideck mesh and ensure the stable structure.

A part of the helideck mesh with cable mesh bonded to the steel frame.
Cable meshes are strong and highly corrosion resistant to be used in the sea water.

Decorative Woven Wire Mesh for Buildings and Hotels

The decorative woven wire mesh is widely used in the residences, hotels, exhibition halls and other places to supply the aesthetic sense. It has various type and different sizes for choice. In the below, there are several types of common decorative woven wire mesh types. If there is not the type you want, you can tell me and we will supply the products according to your requirements and drawings.

We have a full line of woven wire mesh products suited for design and architectural applications. Woven wire mesh is ideal for architectural applications to provide decorative enhancements and functionality.

Coil drapery
Coil drapery is a kind of light mesh with round woven wire and small openings. It can be made to curtains, partitions, ceilings and wall decorations.

The coil mesh is ideal for indoor decorative screens for hotel, exhibition hall and also for the private residences.

Surface treatment of the coil drapery
For more suitable different applications, there are various colors for choice. There are three main surface treatments to let the coil drapery more attractive and colorful.

Lacquer coating. Lacquer coating is cheaper than other surface treatment.
Anodic oxidation. It is better processing and looks better than the lacquer coating. But it is only for the aluminum alloy wire.
Acid washing. it is suitable for the stainless steel wire. After washing from acid, the metal drapery is very light.
Specifications

Material: stainless steel wire, bronze wire, copper wire and aluminum alloy.
Wire diameter: 0.8mm – 1.2mm.
Aperture size: 4mm – 30mm.
Width: max. 6000mm.
Length: no limit.
Color: various colors for choice, such as the bronze, ebony black, purplish red and other colors.
Terms Diameter (mm) Aperture (mm) Thickness (mm)
DWCD-01 0.8 4 3.6
DWCD-02 0.8 5 3.6
DWCD-03 0.8 6 3.6
DWCD-04 0.8 8 3.6
DWCD-05 0.8 9 3.6
DWCD-06 1.0 4 3.6
DWCD-07 1.0 5 3.6
DWCD-08 1.0 6 3.6
DWCD-09 1.0 8 3.6
DWCD-10 1.0 9 3.6
DWCD-11 1.0 10 3.6
DWCD-12 1.0 20 3.6
DWCD-13 1.2 4 3.6
DWCD-14 1.2 5 3.6
DWCD-15 1.2 6 3.6
DWCD-16 1.2 8 3.6
DWCD-17 1.2 9 3.6
DWCD-18 1.2 10 3.6
DWCD-19 1.2 20 3.6
DWCD-20 1.2 30 3.6
A piece of copper coil drapery on the black background.
Copper coil drapery.

A piece of aluminum alloy coil drapery on the black background.
Aluminum alloy coil drapery.

Applications

The coil drapery can be used as room divider, Curtain, Partition, Background, Wall & Ceiling treatment, Window treatment, Visual merchandising, Exterior cladding, Shade, and other interior & exterior decoration.
The coil drapery is widely used in hotels, cafe shops, bars, museums, opera houses, concert halls, office buildings, exhibition halls, shopping malls and air access station.
Copper coil drapery is hanging on the ceiling.
Coil drapery can be used in the ceiling in the hotels and buildings.

A coil drapery curtain hanging on the wall and a piano on the beside of it.
Coil drapery can be used as decorative curtain for the concert hall.

Cable mesh
Cable mesh is woven from metal rods or metal cable and use of the materials including stainless steel, and high strength corrosion-resistant chromium and other metal wires. The cable rope can maintain the stiffness and high strength. The cable mesh has unlimited durability, which can bear the stress and deformation without damage.

Specifications

Material: stainless steel, chromium and other metal.
Cable diameter: 0.45mm – 3mm.
Cable quantity: 2 – 4.
Rod diameter: 0.5mm – 4mm.
Mesh colors: Silver, gold, gunmetal, gray, blue, red, etc.
Terms Diameter (mm) Aperture (mm) Thickness (mm)
DWCD-01 0.8 4 3.6
DWCD-02 0.8 5 3.6
DWCD-03 0.8 6 3.6
DWCD-04 0.8 8 3.6
DWCD-05 0.8 9 3.6
DWCD-06 1.0 4 3.6
DWCD-07 1.0 5 3.6
DWCD-08 1.0 6 3.6
DWCD-09 1.0 8 3.6
DWCD-10 1.0 9 3.6
DWCD-11 1.0 10 3.6
DWCD-12 1.0 20 3.6
DWCD-13 1.2 4 3.6
DWCD-14 1.2 5 3.6
DWCD-15 1.2 6 3.6
DWCD-16 1.2 8 3.6
DWCD-17 1.2 9 3.6
DWCD-18 1.2 10 3.6
DWCD-19 1.2 20 3.6
DWCD-20 1.2 30 3.6
A piece of cable mesh decorative woven wire mesh with two line cables. in the warp
Two line cable wire in the warp direction.

A piece of cable decorative woven wire mesh with three line cables in the warp.
Three line cable wire in the warp direction.

Application

Cable mesh is widely used in building elevation, room dividers, ceilings, shades, balconies and corridors.
Cable mesh can be used in the hotels, museums, opera houses, concert halls, office buildings, exhibition halls, shopping malls and other high grade places for the internal and external decorations.
Cable mesh is installed on the outside of the buildings.
Cable mesh can be used in the interior and exterior of the buildings for decoration.

Cable decorative wire mesh is installed on the railings.
Cable decorative wire mesh can be used in the railings for decoration and protection.

Other types of decorative woven wire mesh
There are various other types of decorative woven wire mesh, they all have various applications and specifications. You can refer to it and contact us to get the complete information about them.

A piece of decorative woven wire mesh with stainless steel round wire in weft and cable in warp.
DWO-01 decorative woven wire mesh.

A piece of decorative woven wire mesh with cable cross below and bottom round wire.
DWO-02 decorative woven wire mesh.

A piece of decorative woven wire mesh with round wire in weft and flat wire in warp.
DWO-03 decorative woven wire mesh.

A piece of decorative woven wire mesh with flat wire in weft and round wire in warp.
DWO-04 decorative woven wire mesh.

A piece of decorative woven wire mesh with plain weave flat wire.
DWO-05 decorative woven wire mesh.

A piece of copper decorative woven wire mesh with double pre-crimped flat wire.
DWO-06 decorative woven wire mesh.

Woven Mesh Test Sieves - Lab Sampling and Analysis

Woven mesh test sieves are made of stainless steel, brass and bronze woven mesh and the stainless steel or brass frames. Commonly sieves are round.

Woven mesh test sieves are supplied in complete range of aperture sizes, diameter sizes, depths, choice of materials, certified degrees of inspection to meet virtually every requirement.

Test sieves should be used with care, cleaned regularly and stored in a safe dry place. To avoid chemical corrosion, we recommend the stainless steel sieves for most lab test sieves and grading sieving material.

Test sieves can be used in various applications, such as laboratory test sieves, metallurgy, abrasive, construction industries and research lab for precise classification of minute granule materials.

There are some special woven mesh test sieves.

Half height sieves
It can be used in the analysis of smaller quantities of samples. These are available in diameter of 100mm, 200mm or 300mm and 3", 8", 12".
Wet washing sieves
Extremely useful sieves can be used where samples need to be separated with the help of wet washing. They are available in 8" diameter and 4" or 8" deep. The frames of the sieves are brass or stainless steel.
Extra depth sieves
Extra depth sieves are commonly used in the construction and cement industries. The sieves are available in a diameter size of 450mm and the depth is 300mm.
A piece of half height test sieve and a pan.
Half-height woven mesh test sieve is used for analysis of smaller quantity materials.

A wet washing woven mesh test sieve with a mesh panel on the white background.
Wet washing woven mesh test sieve is available in 4" or 8" deep.

Specifications

Sieve mesh materials: stainless steel, brass and phosphor bronze.
Frame material: stainless steel and brass, larger diameter sieves also available in galvanized steel.
Aperture size: from 125mm down to 20μm.
Wire diameter: 0.02mm to 6.3mm.
Outer sieves diameter size: 38mm, 100mm, 150mm, 200mm, 250mm, 300mm, 315mm, 400mm, 450mm, 3", 8", 10", 12", 18".
Depth: 1", 1-1/2", 1-5/8", 1.625", 2", 3", 3-1/2", 3.25", 4", 4.25", 6", 8".
Depth type: full height and half height.
Certified degree: ASTM and ISO Standards.
A unit of stainless steel woven mesh test sieves on the white background.
Stainless steel woven mesh test sieves.

A unit of brass woven mesh test sieves on the white background.
Brass woven mesh test sieves.

Features

Corrosive resistance. Stainless steel has outstanding corrosive resistance performance, so the stainless steel test sieves can be used in the chemical and other corrosive environments or can analysis the corrosive materials.
Various apertures for choice. There are wide range of apertures and diameters for choice, which can fit requirements of majority customers.
Customizable. We can supply all kinds of standard test sieves; the special sized sieves can be customized.
Certified: These are the most widely used test sieves and are manufactured to a National or International Specification.
Applications

Woven wire sieves are most widely used for all types of laboratory sampling and particle size analysis. For example the pharmacy testing.
The test sieves is mainly used in metallurgy, abrasive, construction industries.
Woven wire sieves can be used as grading sieves, sifting sieves, sand screening and grain sieves.
A piece of woven mesh test sieve on the ground with soil and grass roots on the sieve.
Woven mesh test sieve can be used as sifting sieve to separate soils.

A unit of woven mesh test sieves with rice and other grains on it.

Printing screen – High Tension, Low Elongation for Accurate Print

Printing screen is commonly made of polyester mesh or stainless steel wire mesh. Compared with the polyester mesh, the stainless steel woven wire cloth for printing has high tension, low elongation and excellent chemical, solvent corrosion resistance performance.

The weaving method of printing screen is plain weave, twill weave an dutch weave. Plain weave printing screen is the most commonly used type. The roll width is commonly 40", 48" and 60" while the length is commonly 100'. It can be customized according to your requirements.

The stainless steel printing screen can be standard stainless steel mesh and ultra thin stainless steel mesh. See the following introduction and decide which one is suitable for you.

Types of printing screen
Standard stainless steel mesh.
Plain weave stainless steel mesh has uniform wire diameter, consistent mesh thickness, even mesh openings and smooth surface. It is suitable for printing applications where requires fine pattern printing with high accuracy. Standard stainless steel mesh is widely used in micro-circuit manufacturing, silk, glass, china and other high end applications.
Three rolls of stainless steel mesh on the table and a small coil stainless steel wire on the screen.
PM-01: Stainless steel mesh has bright surface and corrosion resistance material.Three rolls of stainless steel meshes on the table and a detection tool on the screen.
PM-02: Stainless steel mesh has even and precious mesh openings for high accuracy.
Ultra thin super stainless steel mesh.
Compared with standard stainless steel mesh, ultra thin supper stainless steel mesh has smaller wire diameter and bigger opening area. Additional, it has high tensile strength, little elongation, good deposit uniformity and good release of paste to be used in highly accurate fine line printing applications.
A hand is holding a piece of ultra thin super stainless steel mesh and we can see the finger clearly.
PM-03: Ultra thin stainless steel printing screen is high transparency.A piece of ultra thin printing screen is placed on the company brochure.
PM-04: Ultra thin printing screen has high tension and low elongation performance.
Operating principles of printing screen
Screen printing is a printing technique that uses stainless steel woven wire cloth or polyester mesh to support an ink-blocking stencil. The attached stencil forms open areas of mesh that transfer ink or other printable materials which can be pressed through the mesh as a sharp-edged image onto a substrate. A roller or squeegee is moved across the screen stencil, forcing or pumping ink past the threads of the woven mesh in the open areas.

Screen printing is also a stencil method of print making in which a design is imposed on a screen of silk or other fine mesh, with blank areas coated with an impermeable substance, and ink is forced through the mesh onto the printing surface. It is also known as silkscreen and serigraph.

Specifications of printing screen

Material: stainless steel 304, 316, 304L, 316L, 310S, 430, 317L, 904L.
Weaving method: plain weave, twill weave and dutch weave.
Mesh: 80 mesh to 400 mesh.
Wire diameter: 18 micron to 120 micron.
Thickness: 28 micron to 230 micron.
Width: 40", 48", 60 " and customized.
Length: standard is 100'.
Table 1: Common Specs of Stainless Steel Printing Screen
Item Mesh/Inch Wire Dia.
(μm) Opening (μm) Open Area
(%) Thickness
(μm) Through Ink
(cm3/m2) Calender Thickness
(μm)
PS-01 80 × 80 90 228 52 198–207 103.0 168–170
PS-02 80 × 80 120 198 39 276–288 92.9 228–230
PS-03 100 × 100 100 154 36.8 230–240 77.2 188–190
PS-04 120 × 120 80 132 39 184–192 65.8 148–150
PS-05 150 × 150 60 109 41.7 138–144 50.0 138–142
PS-06 165 × 165 45 109 50.1 95–104 45.1 78–80
PS-07 165 × 165 50 104 45.6 110–115 45.6 88–90
PS-08 180 × 180 45 96 46.4 99–104 41.5 78–80
PS-09 180 × 180 50 91 42 115–120 41.7 88–90
PS-10 200 × 200 40 87 46.9 81–82 43.0 68–70
PS-11 200 × 200 50 77 37 115–120 42.0 88–90
PS-12 230 × 230 35 75 46.7 72–76 37.0 50–67
PS-13 250 × 250 30 72 49.7 63–64 30.0 48–49
PS-14 250 × 250 35 67 43 76–78 32.0 59–61
PS-15 250 × 250 40 62 49.7 82–86 34.0 50–80
PS-16 270 × 270 35 59 39.4 76–80 30.0 58–70
PS-17 290 × 290 20 68 41.7 43–44 18.4 29–30
PS-18 300 × 300 30 55 38 66–68 28.0 40–59
PS-19 325 × 325 23 55 49.8 49–53 25.4 38–39
PS-20 325 × 325 28 50 41.2 63–64 26.4 50–51
PS-21 325 × 325 30 48 38 66–68 24.0 40–59
PS-22 350 × 350 25 48 43 52–54 18.7 41–50
PS-23 400 × 400 18 46 51.3 36–40 20.0 28–30
PS-24 400 × 400 23 41 40.7 50–54 19.0 35–48
Advantages of stainless steel printing screen

Uniform wire diameter.
Consistent mesh thickness.
Evenly tension weaves.
High tension.
Super precision. Fine wire diameter and even mesh opening ensures high precision.
High flexibility. The printing mesh will not lose elasticity at extreme tension.
Low elongation. Very small elongation of printing screen at high tension.
High corrosion resistance. Stainless steel printing mesh has better corrosion resistance than the polyester fiber.
Good heat-melting resistance. Stainless steel printing mesh is suitable for heat-melting ink.
Great solvent resistance. It can prevent various solvents from corroding printing mesh and ensure the safety of printing screen.
A glass printing machine on the white background.
PM-05: Printing screen is high flexibility for glass printing.A textile printing machine with four extensions on the white background.
PM-06: Printing screen is high precision for textile printing.
Applications of stainless steel printing screen

LEP shielding mesh.
Micro-circuit manufacturing.
Textile printing.
Ceramics printing.
Glass printing.
A lady is holding a purple silk muffler with flowers on the muffler.
PM-07: Printing screen for silk printing.Several tableware with blue and white porcelain pattern on the table.
PM-08: Printing screen for ceramic printing.
Three glass decoration with scenery patterns are hanging on the wall.
PM-09: Printing screen for glass printing.A circuit board is placed on the table.

Shielding Screen - RFI and EMI Shielding Screen Mesh

Shielding screen has outstanding resistance to the radiation, static and electromagnetism, so they are widely used in the commercial, industrial, military and laboratory. The shielding screen has outstanding shielding performance to the RFI and EMI. The RFI refers to radio frequency interference and the EMI refers to electromagnetic interference.

Shielding material
Shielding screen is mainly made of stainless steel wire and copper wire.
Stainless steel. The stainless steel is mainly for the SUS 316.
Copper. The copper is mainly the pure copper, also it is called red copper. The red copper has 99.98% copper. It is very soft, so it is easy to cut and form.

Shielding screen weaving method
The weaving method of the shielding screen is plain weave, which is used for the majority of the woven wire cloth. Each warp wire crosses above and below each weft wire. And each weft wire crosses above and below each warp wire.

Shielding screen features
Outstanding shielding function to the radiation, static and electromagnetism.
Shielding for the RFI and EMI.
Excellent fire and corrosion resistance.
Various applications.
Shielding screen application
Shielding screen mesh is widely used to protect key equipment from RFI and EMI. The earliest example of this is Faraday cage.

The shielding screen mesh can be used in the laboratory for the electrophysiology, confocal microscopy to protect against static and electromagnetic waves.
The shielding screen can be used for the military to protect battlefield tactic system, communication system and computers.
The shielding screen can be used for the industry purpose to protect test chambers, computer rooms and indeed recording rooms.
The shielding is also used in many public information displays such as airport display boards as well as rail and bus terminals.
Other applications include telecommunications, test measurement equipment, navigation, medical and radar applications.
Some peoples will do the Faraday cage by themselves to prevent the radiation from the Wi-Fi and other places.
A Faraday cage made of copper shielding screen is on the table with a confocal microscopy in it and a computer screen hanging on outside of the cage.
Shielding screen can be used in the laboratory to protect against static and electromagnetic waves.

A Faraday cage made of stainless steel shielding screen is on the floor and a simplified bed in the cage.
Shielding screen can be used as Faraday cage to protect people from disturbing from the radiation and wifi signal.

Specifications of Shielding Screen
Mesh Wire Opening Width Open area Binding Weight Material
(warp) (weft) (warp) (weft)
  (mm) (mm) (mm) (mm) (%) (kg / m2)
50 50 0,030 0,030 0,478 1220 89 plain 0,023 AISI 316
80 80 0,030 0,030 0,288 1220 82 plain 0,036 AISI 316
100 100 0,028 0,030 0,226 1220 79 plain 0,040 AISI 316
50 50 0,030 0,030 0,478 1220 89 plain 0,023 copper
75 75 0,030 0,030 0,309 1220 83 plain 0,034 copper
80 80 0,030 0,030 0,288 1220 82 plain 0,036 copper
100 100 0,056 0,056 0,198 1220 61 plain 0,158 copper

Corrosion Resistant Fly Mesh Insect Mesh

Durable Fly Mesh Prevents the Passage of Insects.
Close view of the plain weave wire mesh screen.
Our fly mesh is the most suitable choice to keep the flies, mosquitoes, wasps, moths and other insects out of your room. What ever the size and shape of your windows, you can buy our mesh first, then cut them into the size you need, just using your household scissors is OK.
https://www.wovenwirecloth.org/wovenwire/fly-mesh-insect-screen.html
Below are the detailed specifications of our fly mesh:

Roll dimension: width - 1m/1.2m; length - 30m, 50m, 100m.
Mesh count (opening/inch): 16 × 16.
Wire diameter: 0.22mm / 0.0087" / 34 gauge.
Aperture (opening size): 1.36mm / 0.0535".
Open rate: 73.8%.
Weaving standard: ISO/TS 9002:2016.
Material: Stainless steel fly mesh
Detailed structure of the plain weave fly mesh.
Plain woven stainless steel fly mesh has stable structure, also called insect mesh.A hand is holding a corner of the stainless steel wire mesh.
Our fly mesh can prevent the insects out while don’t block the sunshine.
Features:

Anti-rust and corrosion resistant, which support a long life span more than 5 years.
Can be easily cut into the size and shape by household scissors.
Material: Epoxy coating fly mesh
Closed-edge epoxy coating fly mesh.
Epoxy coating layer helps the wire away from the rust and corrosion.Metal fly mesh keeps the flies out.
Anti-rust insect screen insures you a clean and healthy environment.
Features:

Lower cost than stainless steel fly mesh.
Safety coating layer without the rusty spots.
Material: Galvanized fly mesh
Galvanized wire mesh on the hand.
Electro-galvanized fly mesh with bright surface and rust resistant feature.A pair of scissors are cutting the fly mesh.
Our fly mesh can be easily cut by the household scissors.
Material: Aluminum fly mesh
A roll of aluminum wire mesh.
Aluminum wire mesh has lighter weight than other material.A caliper is measuring the insect screen opening size.
Our standard fly mesh is 16 mesh count with 13.5mm opening size.
Features:

Much lighter weight than other metal material
Clean surface without rusty spots.
Application:

Window screen in the red frame.
Our fly mesh is the best choice as the window screen.Aluminum insect screen on the window frame.
Aluminum window screen can prevent the passage of flies.
Pleating process:
We can also provide the pleating service if request.

A pack of stainless steel pleated wire mesh.
If you need the wire mesh to be pleated, please tell us the details request.Pleated wire mesh structure on the paper.
Pleated depth is needed if the wire mesh need this process.
Large scale inventory quantity meet all your need!

Large quantity of wire mesh rolls are stocked in our warehouse.

Window Screen Prevents Mosquitoes Entering Houses

Window screen is commonly made of aluminum alloy wire, galvanized wire, stainless steel wire and copper wire. With various materials, the window screen has outstanding resistance to the corrosion, rust, heat, acid and alkali. Window screen is widely seen and used in our daily life. It is can be used in the residences, hotels, villa and other places for prevent mosquitoes and other insects from entering the house.

Aluminum window screen
Silver, black and charcoal color aluminum window screen on the white background.
Aluminum window screen has silver, black and charcoal colors.

Aluminum window screen is the most economical types among the woven wire mesh window screens.

It is made of aluminum magnesium alloy wire. The aluminum window screen has three main colors: silver, black and charcoal. Silver color is the most economical and commonly seen color in the aluminum window screen. The black and charcoal color can reduce the glare and improve the visibility.

The aluminum window screen is more lightweight than other materials. It is also the most widely used type.

Specifications

Wire diameter: BWG 31 – BWG 34.
Hole size: 14 mesh × 14 mesh, 14 mesh × 16 mesh, 14 mesh × 18 mesh, 16 mesh × 16 mesh, 16 mesh × 18 mesh, 18 mesh × 18 mesh.
Width: 18", 24", 30", 36", 48", 60", 72".
Length: 30', 50', 100' and so on.
Color: black, silver, charcoal.
Copper window screen
A roll of copper window screen and a detailed picture on the screen.
Copper window screen has beautiful surface.

Copper window screen can be divided into red copper window screen and bronze window screen.

Red copper window screen is not common used. It can resist atmospheric corrosion, and salt. But in many situations, the red copper will slowly darken along with time variation. The exposed screen will turn green, which may affect the overall aesthetics.

The bronze window screen is made of 85 - 90% copper and 10 - 15% tin. It has good strength and durability, so it is stronger than the red copper. It has high resistance to the acid, corrosion and rust. Also, the copper window screen can improve the aesthetic appeal of the home exteriors by providing a distinct appeal to the windows.

Specifications

Material: red copper wire (99.8% copper) and bronze wire (85 – 90 % copper and 10 – 15 tin).
Wire diameter: 0.17mm - 0.4mm.
Weaving: plain weaving.
Mesh size: 14 mesh × 14 mesh, 16 mesh × 16 mesh, 16 mesh × 14 mesh, 18 mesh × 18 mesh, 18 mesh × 14 mesh, 20 mesh × 20 mesh, 22 mesh × 22 mesh, etc.
Width: 24, 30", 36", 48", 60", 72", etc.
Length: 25', 50', 100', etc.
Stainless steel window screen
A stack of stainless steel window screens.
Stainless steel window screen has better acid and alkali resistance.

The stainless steel window screen has two main types: standard window screen and stainless steel security screen.

The standard window screen is made of the stainless steel wire. It has high quality resistance to the acid and alkali. The stainless steel security screen is also called bullet-proof window screen. It is made of the stainless steel wire (304 or 316). The surface treatment of the stainless steel security screen is electrostatic spray.

The standard stainless steel window screen can be used in the ordinary residences for prevent mosquitoes and other insects from entering the house. The stainless steel security screen can be installed on the doors and windows to prevent the intruders and thieves from entering the house. It is ideal for the places where the security is important.

Standard stainless steel window screen specifications

Material: stainless steel wire. 304, 316, 316L.
Wire diameter: BWG 30 - BWG 38.
Hole size: 14 mesh × 14 mesh, 16 mesh × 16 mesh, 18 mesh × 14 mesh, 18 mesh × 18 mesh, 20 mesh × 20 mesh.
Width: 2', 3', 4', 5'.
Length: 30', 50', 100' and so on．
Color: Bright and black.
Stainless steel security screen specifications

Material: Stainless steel wire (304 or 316).
Wire diameter and mesh size: 0.7mm × 12 mesh, 0.8mm × 11 mesh, 0.9mm × 10 mesh.
Panel size: 1200mm × 2000mm, 1200mm × 2400mm, 900mm × 2000mm, 900mm × 2400mm, 750mm × 2000mm, 750mm × 2400mm.
Surface treatment: electrostatic spray.
Color: Black, gray, white, yellow, etc.
Main market: Australia, New Zealand, American and Europe.
Galvanized window screen
Seven rolls of bluish galvanized window screen on the floor.
Bluish window screen has better resistance to the corrosion and rust.

Galvanized window screen is another popular and economical type. The material is low carbon steel wire. And the surface treatment can be galvanized before weaving and galvanized after weaving. The colors of the galvanized window screen are bluish white and white. The bluish white color is much lighter and it has better resistance to the corrosion and rust.

Specifications

Material: Low carbon steel wire.
Weaving: plain weaving. Galvanized before weaving and galvanized after weaving.
Surface Treatment: Electric galvanized and hot-dipped galvanized.
Wire Diameter: BWG 31, BWG 32, BWG 33, BWG 34.
Hole Size (mesh/inch): 14 × 14, 16 × 16, 16 × 14, 18 × 18, 18 × 16, 18 × 14, 20 × 20, 22 × 22, 24 × 24, 28 × 28, 30 × 30.
Width: 24", 30", 36" and 48", etc.
Length: 25', 30', 50', 100', etc.
Color: White and bluish white.
Features of the window screen

Resistance to the corrosion and rust. Galvanized, aluminum and stainless steel window screen.
Resistance the acid and alkali. Stainless steel window screen has better resistance to the acid and alkali.
High tensile and durability. Compared with plastic window screen, metal window screen has excellent high tensile and durability, which can assure the long service life.
Small aperture size can prevent almost all the insects from entering the house.
Good air-flow. The appropriate opening window screen can ensure the movement of the air.
Beautiful surface. The copper window screen can supply not only the prevention to the insects but also the aesthetic sense to the building.
Prevention to the thieves and intruders. The stainless steel security screen has extremely high tensile, which can prevent thieves and intruders from entering the house.
Application of the Insect Screen

Window screen is mainly used as the windows, doors, porch screens, patio screens and pool screens in residences, hotels and other places.
Copper window screen has outstanding resistance to the salt, so it is ideal for the coastal areas to prevent insects from entering the house.
Stainless steel security screen can be used in the security places to stop thieves and intruders from entering the house.

Barbecue Grill Mesh - Ideal for Camping and Travel BBQ

Barbecue grill mesh is made of galvanized steel wire, carbon steel wire and stainless steel wire. The mesh can be woven wire mesh and welded wire mesh. The barbecue grill mesh can be divided into one-off barbecue grill mesh and recycle barbecue grill mesh. It has various shape type, such as the circular, square and rectangle. Also, there are also other special shapes.

Barbecue grill mesh is widely used in the camping, travel, restaurants and other places for baking and roasting fish, vegetables, meat, seafood and other delicious food.

One-off barbecue grill mesh
The one-off barbecue grill mesh is made of galvanized redrawing wire, and the edge is tinplate. It is widely used in Japan, Canada, Argentina and other countries.

The one-off barbecue grill is economical and cheaper than the recycle barbecue grill mesh. It is suit for the trouble-free and simple to use grilling at the beach, campsite, soccer field, or home. It can be also used in where the price is more important than the durability.

A piece of square one-off barbecue grill mesh on the floor.4
Square one-off barbecue grill mesh.

A piece of circular one-off barbecue grill mesh on the floor.
Circular one-off barbecue grill mesh.

Recycle barbecue grill mesh
The recycle barbecue grill mesh can be made of medium carbon steel wire and stainless steel wire. The surface treatment can be galvanized, electrolysis, polish, chroming, nickeling, coppering.

The recycle barbecue grill mesh can be woven wire and welded wire. Woven wire is commonly used.

In Korea, the common barbecue grill mesh is welded mesh. The medium carbon mesh is welded to the edge and then galvanized. Also, there are parts of customers uses the galvanized welded wire mesh without any edge.

In Occident countries, the materials of the barbecue grill mesh are stainless steel wire and carbon steel wire. The surface treatment of the carbon steel wire can be chroming, nickeling and galvanized. The stainless steel wire is welded and then polished to a beautiful grill mesh. Commonly, there is a handle on the grill mesh.

The features of the recycle barbecue grill mesh are corrosion and rust resistance, durability and environmental friendly.

A handle barbecue grill mesh netting on the floor.
Korea barbecue grill mesh is made of welded wire mesh and then galvanized.

A piece of circular barbecue grill mesh with two handle is placed on the blue background.
Occident barbecue grill mesh is made of stainless steel wire and then welded to the edge.

Specification

Material: stainless steel wire, carbon steel wire and galvanized steel wire.
Technology: woven or welded.
Wire diameter: 0.4mm - 3.0mm.
Aperture size: 1mm - 15mm.
Mesh diameter: 230mm, 240mm, 260mm, 270mm, 280mm, 300mm, 350mm, 400mm, 500mm.
Service life type: one-off barbecue grill mesh and recycle barbecue grill mesh.
Shape type: circular flat, circular concave, square flat, square concave and rectangle.
Edge type: covered edge and welded edge.
Handle or support is available.
Surface treatment: galvanized, chroming, nickeling, coppering and polish.
Circular Shape
Wire Gauge (SWG) Wire Diameter (mm) Diameter (mm) Weight (kg / piece)
18 1.2 240 0.075
18 1.2 260 0.09
18 1.2 270 0.1
18 1.2 300 0.12
Square Shape
Wire Gauge (SWG) Wire Diameter (mm) Length (mm) Width (mm) Weight (kg / piece)
18 1.2 260 240 0.09
18 1.2 280 260 0.11
18 1.2 300 300 0.12
Rectangle Shape
Wire diameter (mm) Aperture size (mm) Panel width (mm) Panel length (mm)
3 76 × 12.7 457 610
2.5 76 × 12.7 457 914
3 76 × 12.7 457 914
A piece of galvanized circular concave barbecue grill mesh is inverted on the desk.
Barbecue grill mesh has concave and flat surface.

A piece of barbecue grill mesh with handle is placed on the carton.
The handle of the barbecue grill mesh let the mesh easy to operate.

Features

Heat resistance.
Corrosion and rust resistance.
Non-toxic and odorless, environmental friendly.
Convenient to use.
Durability and long service life.
Polish treatment makes the grill mesh surface smooth and bright.
Application

Barbecue grill mesh can be used in the restaurants, camping, travel and other places.
Barbecue grill mesh can be used for wheaten food, meat, fish, seafood and vegetables.
A piece of barbecue grill mesh on the stove with two corns and pumpkin on the grill mesh.
Barbecue grill mesh can be used to roasting the vegetables and corns.

A piece of stainless steel barbecue grill mesh on the stove with some pieces of meat on the grill mesh.
The equal opening of the barbecue grill mesh can assure the meat are heated evenly.

A piece of barbecue grill mesh is installed on the desk of the barbecue restaurant.
Barbecue grill mesh can be used in the barbecue restaurant.

A piece of barbecue grill mesh is installed on the foldable stove.
Barbecue grill mesh can be used in the camping and travel.

Woven Wire Vibrating Screen Mesh for Stones and Gravels

Compared with woven wire filter cloth, the woven wire vibrating screen mesh has coarse wire diameter and large opening size. The vibrating screen also plays the filter roles for the sands, stones.

Spring steel woven wire vibrating screen mesh is installed on the machine.
Woven wire vibrating screen mesh can b

e used in mining, coal, metallurgy industries.

Woven wire vibrating screen mesh is made of spring steel wire and manganese steel wire. The spring steel wire can be divided into high carbon steel wire and medium steel wire. The commonly used material of manganese steel wire is 65 Mn. Manganese steel vibrating screen mesh has better wear resistance than other materials. Even if the surface is strong impacted and abraded, the interior remains high plasticity and toughness. When the old surface is worn and torn, it will form a new wear-resistant layer.

The high quality raw materials make the woven wire vibrating screen mesh have many excellent characteristics, such as high tensile, wear and weather resistance.

Except for the woven wire vibrating screen mesh, there are two other types of vibrating screen mesh: perforated vibrating screen and polyurethane vibrating screen.

Perforated vibrating screen mesh has three different hole types: round hole, square hole and hexagonal hole. The smooth surface can let the materials move freely and reduce the blocking.

The polyurethane vibrating screen mesh has a special structure, which has metal steel wire inside and polyurethane surface. This structure can increase the wear life and improve the screening efficiency.

A piece of square opening perforated vibrating screen mesh.
Perforated vibrating screen mesh has smooth surface to reduce the blocking.

A piece of yellow polyurethane vibrating screen mesh on the ground.
Polyurethane vibrating screen mesh has metal steel wire inside and polyurethane surface.

Specification

Material: High carbon steel, high tensile spring steel.
Wire diameter: 0.71mm - 14mm.
Opening size: 1mm - 110mm.
Weaving type: Double crimped, intermediate crimped, flat top crimped and lock crimped.
Mesh type: Square, rectangular slot, long slot.
Surface treatment: Black or red color painted.
Edge preparation: Bent or hook.
Hook type: C or U hook for 30° - 180°.
A piece of manganese woven wire vibrating screen mesh with hooked edge.
The edge types of woven wire vibrating screen mesh are plain, bent and hooks.

A piece of intermediate crimped woven wire vibrating screen mesh.
Woven wire vibrating screen mesh has flat top crimped, intermediate crimped, double crimped, lock crimped weaving methods.

Features

Wear and abrasion resistance.
Heavy impact resistance.
High temperature resistance.
High tensile strength and toughness.
Long service life.
Various opening size for choice to fit almost equipments.
The stability of the woven wire vibrating screen can improve the separating efficiency.
Application

Woven wire vibrating screen mesh can be used as screen panel in the quarry screen and crusher screen to separate and size the stones, sand, gravel, coal and other materials.
Woven wire vibrating screen mesh is widely used in the mining, coal, metallurgy, chemical and other industries.
Woven wire vibrating screen mesh can be used as screen mesh for the trommel screen to improve the working efficiency and separate lighter and wetter materials in the chemical, coal, construction, plastic, metallurgy, mineral-selecting, agriculture, etc.
Woven wire mesh is installed on the trommel screen machine.
Woven wire vibrating screen mesh can be installed on the trommel screen to separate wetter and lighter materials.

A working vibrating screen machine with gravels on it.
Woven wire vibrating screen mesh can be used to separate stones, sands and gravels.

Woven Wire Vibrating Screen Mesh for Stones and Gravels

Compared with woven wire filter cloth, the woven wire vibrating screen mesh has coarse wire diameter and large opening size. The vibrating screen also plays the filter roles for the sands, stones.

Spring steel woven wire vibrating screen mesh is installed on the machine.
Woven wire vibrating screen mesh can be used in mining, coal, metallurgy industries.

Woven wire vibrating screen mesh is made of spring steel wire and manganese steel wire. The spring steel wire can be divided into high carbon steel wire and medium steel wire. The commonly used material of manganese steel wire is 65 Mn. Manganese steel vibrating screen mesh has better wear resistance than other materials. Even if the surface is strong impacted and abraded, the interior remains high plasticity and toughness. When the old surface is worn and torn, it will form a new wear-resistant layer.

The high quality raw materials make the woven wire vibrating screen mesh have many excellent characteristics, such as high tensile, wear and weather resistance.

Except for the woven wire vibrating screen mesh, there are two other types of vibrating screen mesh: perforated vibrating screen and polyurethane vibrating screen.

Perforated vibrating screen mesh has three different hole types: round hole, square hole and hexagonal hole. The smooth surface can let the materials move freely and reduce the blocking.

The polyurethane vibrating screen mesh has a special structure, which has metal steel wire inside and polyurethane surface. This structure can increase the wear life and improve the screening efficiency.

A piece of square opening perforated vibrating screen mesh.
Perforated vibrating screen mesh has smooth surface to reduce the blocking.

A piece of yellow polyurethane vibrating screen mesh on the ground.
Polyurethane vibrating screen mesh has metal steel wire inside and polyurethane surface.

Specification

Material: High carbon steel, high tensile spring steel.
Wire diameter: 0.71mm - 14mm.
Opening size: 1mm - 110mm.
Weaving type: Double crimped, intermediate crimped, flat top crimped and lock crimped.
Mesh type: Square, rectangular slot, long slot.
Surface treatment: Black or red color painted.
Edge preparation: Bent or hook.
Hook type: C or U hook for 30° - 180°.
A piece of manganese woven wire vibrating screen mesh with hooked edge.
The edge types of woven wire vibrating screen mesh are plain, bent and hooks.

A piece of intermediate crimped woven wire vibrating screen mesh.
Woven wire vibrating screen mesh has flat top crimped, intermediate crimped, double crimped, lock crimped weaving methods.

Features

Wear and abrasion resistance.
Heavy impact resistance.
High temperature resistance.
High tensile strength and toughness.
Long service life.
Various opening size for choice to fit almost equipments.
The stability of the woven wire vibrating screen can improve the separating efficiency.
Application

Woven wire vibrating screen mesh can be used as screen panel in the quarry screen and crusher screen to separate and size the stones, sand, gravel, coal and other materials.
Woven wire vibrating screen mesh is widely used in the mining, coal, metallurgy, chemical and other industries.
Woven wire vibrating screen mesh can be used as screen mesh for the trommel screen to improve the working efficiency and separate lighter and wetter materials in the chemical, coal, construction, plastic, metallurgy, mineral-selecting, agriculture, etc.
Woven wire mesh is installed on the trommel screen machine.
Woven wire vibrating screen mesh can be installed on the trommel screen to separate wetter and lighter materials.

A working vibrating screen machine with gravels on it.
Woven wire vibrating screen mesh can be used to separate stones, sands and gravels.

Woven Wire Filter Cloth for Gas and Liquid Filtering

v

Woven Wire Filter Cloth - Discs, Tubes, Cartridge and Basket
Woven wire filter cloth has different materials and specifications, also they have various types and applications. You can refer to the below article and know more about them, so that you can find the perfect one for you.

Materials of woven wire filter cloth

The woven wire filter cloth is mainly made of stainless steel and copper.

Stainless steel wire includes SUS 302, 304, 316, 316L and so on.
Copper wire includes the red copper and brass. Mainly is the brass wire.
Specifications of the woven wire filter cloth

Wire diameter: 0.020mm - 2.03mm.
Mesh: 1 mesh - 635 mesh.
Width: 0.5m - 6m.
Shape: round, rectangle, ring, oval, cone.
Weaving method: plain weave, twill weave, plain dutch weave, twill dutch weave.
Packing: waterproof paper and wooden box.
Woven Wire Filter Cloth Plain Weave Specification
Mesh/Inch Wire Diameter Aperture Open Area Weight (LB) /100 Square Foot
Inch MM Inch MM %
1 × 1 0.080 2.03 0.920 23.37 84.6 41.1
2 × 2 0.063 1.60 0.437 11.10 76.4 51.2
3 × 3 0.054 1.37 0.279 7.09 70.1 56.7
4 × 4 0.063 1.60 0.187 4.75 56.0 104.8
5 × 5 0.041 1.04 0.159 4.04 63.2 54.9
10 × 10 0.025 0.64 0.075 1.91 56.3 41.2
24 × 24 0.014 0.356 0.0277 0.70 44.2 31.8
80 × 80 0.0055 0.140 0.0070 0.18 31.4 16.9
90 × 90 0.005 0.127 0.0061 0.16 30.1 15.8
100 × 100 0.0035 0.089 0.0065 0.17 42.3 8.3
120 × 120 0.0037 0.0940 0.0064 0.1168 30.7 11.6
160 × 160 0.0025 0.0635 0.0038 0.0965 36.4 5.94
200 × 200 0.0021 0.0533 0.0029 0.0737 33.6 6.2
250 × 250 0.0016 0.0406 0.0024 0.0610 36.0 4.4
300 × 300 0.0051 0.0381 0.0018 0.0457 29.7 3.04
325 × 325 0.0014 0.0356 0.0017 0.0432 30.0 4.40
400 × 400 0.0010 0.0254 0.0015 0.370 36.0 3.3
500 × 500 0.0010 0.0254 0.0010 0.0254 25.0 3.8
635 × 635 0.0008 0.0203 0.0008 0.0203 25.0 2.63
Woven Wire Filter Cloth Dutch Weave Specification
Mesh Wire Diameter (MM) Material (AISI)
12mesh × 64mesh 0.58 × 0.40 304 or 316
24mesh × 110mesh 0.36 × 0.25 304 or 316
14mesh × 88mesh 0.50 × 0.33 304 or 316
30mesh × 150mesh 0.23 × 0.18 304 or 316
40mesh × 200mesh 0.18 × 0.13 304 or 316
50mesh × 250mesh 0.14 × 0.11 304 or 316
80mesh × 700mesh 0.10 × 0.08 304 or 316
165mesh × 800mesh 0.071 × 0.040 304 or 316
165mesh × 1400mesh 0.06 × 0.04 304 or 316
200mesh × 1800mesh 0.05 × 0.032 304 or 316
325mesh × 2300mesh 0.035 × 0.025 316L
Types of the woven wire filter cloth

Filter tube
The filter tube includes filter tube and cylinder. It is widely used in petroleum, chemical industry, pharmacy, food stuff and water treatment. Major materials are stainless steel wire woven wire cloth, perforated metal, expanded metal and metal fiber web. The sizes and filtration rating can be customized.
Five copper filter tube with different sizes.
Filter tube materials are stainless steel and copper.

Several filter cylinders on the dark green cloth with different sizes and materials.
Filter cylinder has various types and materials.

Filter discs
Filter discs are mainly made of stainless steel and brass wire. It has various types, such as the rectangle, ring, round, oval, polygon and irregular shape. The types include single layer and multi-layer. The multi-layer can be edge covered discs and sintered mesh.
Filter discs have various applications. It can be used in the foodstuff and spices, such as the milk powder, coffee, tea, rice and grains. The filter discs can be used for the sugar and salt. It can be used for filtering the chemical products. The filter discs are widely used in the chemical, paper making, plastic recycling and pharmaceutical industries.
Thirteen filter discs with different sizes and materials.
Filter discs have different sizes, materials and shapes.

A piece of filter disc with multi-layer.
Filter disc has single layer and multi-layer types.

Irregularly shaped mesh filter
Irregularly shaped mesh filter is made of stainless steel or copper steel woven wire cloth. Other materials are available. The irregularly shaped mesh filter has various shapes and sizes. It can be divided into single-layer and multi-layer. We also can provide the products according to your requirements.
The irregularly shaped mesh filter is mainly used for the filtration of air, water, liquid, medium cleaning and flow control.
Ten irregularly shaped mesh filter with different shapes and sizes.
Irregularly shaped mesh filter has various types and filters to fit different application.

Three different sizes of irregularly shaped sink strainer on the table
Irregularly shaped mesh filter can be used as sink strainers in the kitchen exclusive.

Sintered filter mesh
The sintered filter mesh is made of sintered multi-layer woven wire cloth, which is special laminated and sintered in vacuum oven, welded with flange in circle or cone filter. the sintered filter mesh commonly has five layers.
The porous metal structures provide the accurate filtration characteristics of woven wire cloth for greater strength and durability.
The sintered filter mesh is widely used in pharmaceutical, chemical and food industries. It is available for filter dryers, centrifuges, fluid bed dryers, dust collectors and other applications.
A piece of sintered filter mesh disc on the wooden desk.
The sintered filter mesh has disc, cone and other shapes.

A piece of sintered filter mesh with five layers.
The sintered filter mesh commonly has five layers.

Mesh Filter Cartridge
Filter cartridge is mainly made of copper, stainless steel and sometimes aluminum.
The mesh filter cartridge can be divided into single layer and multi-layer. The filter rating can be 3 microns to 200 microns. The sizes of the mesh filter cartridge are various. We can customize the products according to your requirements.
Mesh filter cartridge is mainly used for the filtration of air, medium cleaning and flow control of lubrication, oil, hydraulic pressure and air pressure system.
Four stainless steel filter cartridge on the desk.
Material of the filter cartridge can be stainless steel and copper.

A piece of single layer filter cartridge and a multi-layer filter cartridge on the white desk.
Filter cartridge can be divided into single layer and multi-layer.

Filter basket
Filter basket is mainly made of stainless steel wire and treated with electrolytic polishing technology, which can let the filter basket bright as a mirror.
The filter basket has smooth surface, it is resistant to the corrosion and rust. It is non-toxic and environmental friendly products.
The filter basket is widely used in the medical apparatus and instruments, food appliance disinfection and chemical experiment. It can be also used as the basket for flower, fruit, dishes and other things. Filter basket has various types and sizes to filter the flour, rice and other powder things in the food industries.
A sterilization basket on the white background with two handle.
The filter basket can be used as the sterilization basket in the chemical and pharmaceutical industries.

A hand is filtering the almond powder using the filter basket.
Filter basket is widely used in the food industries to filter powders, flours, rice and other materials.

Features of the woven wire filter cloth

Acid and alkali resistance. The stainless steel woven wire filter cloth has outstanding resistance to the acid and alkali.
Corrosion, rust and heat resistance. Stainless steel woven wire filter cloth has the excellent resistance to the corrosion, rust and heat.
Stable performance, reliable quality.
Attractive appearance. The copper woven wire filter cloth can supply the function of filtration and beauty.
Various types for choice. There are so many types of filter cloth, you can choose the best one for you.
Customized. We can supply the standard specification products; we can also customize the products according to your requirements.
Various applications. The woven wire cloth has a wide range of applications.
Durable and can be easily cleaned.
Can be easily shaped and formed into elements for custom applications.
Application of the woven wire filter cloth

Woven wire filter cloth can be used for the filtration of solid, liquid and gas.
Woven wire filter cloth is mainly used as filters in petroleum, chemical, mineral, pharmacy and water treatment.
Woven wire filter cloth can be used in the food industries for filtering the flour, rice and other grains.
Woven wire filter cloth can be used in the plastic extrusions.

Crimped Woven Wire Mesh for Mining and Pig Raising

Crimped woven wire mesh is made of high quality carbon steel wire, stainless steel wire, galvanized steel wire and other materials. It has various weaving method, such as the double crimped, flat top crimped, intermediate crimped and lock crimped. The crimped woven wire mesh has square opening and rectangle opening, which has different wire diameters and applications.

The pre-crimped weaving method can assure the accurate open area and make the structure stability and smooth.

The crimped woven wire mesh has various applications. The heavy duty crimped woven wire cloth can be used as vibrating screen in the mining, coal, crusher and other industries. The light crimped woven wire mesh with thinner wire diameter and small opening size can be used as barbecue grill mesh, pig feeding, protective fences for the equipment and stairs.

Dutch Weave Woven Wire Cloth Filters Liquid and Slurry

Dutch weave woven wire cloth is mainly made of stainless steel wire and brass wire. It can be divided into plain dutch weave woven wire cloth, twill dutch weave woven wire cloth and reverse dutch woven wire cloth.

Plain dutch weave
Plain dutch weave woven wire cloth is similar as plain weave woven wire cloth. Each warp wire and each weft wire passes over and under the next adjacent wire.

Plain dutch weave woven wire cloth has two sizes of wire diameter. The weft wires has thinner wire diameter, which is woven tightly together to provide a tight mesh for filtering. The warp wires has coarser wire diameter, which provides strength to the woven wire cloth.

Characteristics

Zero aperture.
It is solid than square and rectangular mesh.
The open area is relatively higher than the other weave.
Application
Plain dutch woven wire cloth is used for separation of solids and clear filtration of liquids, as in the cleaning of fuels or hydraulic liquids, or in water treatment in chemical, mining industry.

Stainless Steel Plain Dutch Woven Wire Mesh
Mesh Count Particle Retention Thickness Weight Flow Rate Per Square Inch
Microns Inches Inches lbs./sq. ft. Oil GPM Fuel GPM Air SCFM
10 × 52 325 0.0128 0.059 1.03 3.8 8.5 47
12 × 64 295 0.0116 0.048 0.76 3.7 8.3 45
14 × 88 245 0.0096 0.037 0.69 3.6 8.3 44
24 × 110 138 0.0054 0.03 0.52 3.5 7.9 43
30 × 150 102 0.0042 0.021 0.37 3.0 7.3 38
40 × 200 84 0.0033 0.016 0.27 2.5 7.2 35
30 × 150 82 0.0032 0.02 0.38 1.6 4.5 27
50 × 250 64 0.0025 0.012 0.22 1.9 6.2 33
A drawing of the plain dutch weave woven wire cloth.
Plain dutch weave woven wire cloth drawing.

A hand is holding a piece of plain dutch weave woven wire cloth disc.
Plain dutch weave woven wire cloth disc.

Twill dutch weave
It is the extension of the twill weave. Each warp wire and each weft wire passes over and under the next two adjacent complementary wires, which is similar as twill weave. The wire diameter of warp wire is larger than weft wire. The mesh count in the weft direction is greater than the warp direction. Dutch twill weave enables the weft wires to be woven more densely and much smaller aperture sizes can be achieved.

Twill dutch weave is capable of supporting greater loads than the dutch weave. It has finer openings than the twilled weave. It is used for filtering heavy materials.

Characteristics

Zero aperture.
Light-proof woven.
High resistance due to tight wire position.
Extreme low absolute grade of fineness (down to 5 – 6 μm).
Heat resistance.
Acid and alkali resistance.
Corrosion and rust resistance.
Application
It is the finest filtration in hydraulic systems, especially for critical applications, such as aero-space and fuel.

(mesh/inch) Warp × Weft Warp × Weft (mm) Aperture Size (μm) Available Area % Thickness (mm)
20 × 270 0.25 × 0.2 119 17.6 0.65
20 × 200 0.35 × 0.28 118 12.1 0.915
24 × 300 0.28 × 0.18 110 19.6 0.64
20 × 150 0.45 × 0.355 101 7.5 1.16
30 × 340 0.28 × 0.16 89 17.9 0.60
30 × 270 0.28 × 0.20 77 11.2 0.68
40 × 540 0.18 × 0.10 70 23.5 0.38
40 × 430 0.18 × 0.125 63 15.4 0.43
50 × 600 0.125 × 0.09 51 17.2 0.305
50 × 500 0.14 × 0.11 47 12 0.364
65 × 600 0.14 × 0.09 36 0.32
70 × 600 0.14 × 0.09 31 10.1
78 × 760 0.112 × 0.071 13.5 0.254
78 × 680 0.112 × 0.08 29 10.3 0.272
80 × 680 0.112 × 0.08 28 9.8
90 × 850 0.10 × 0.063 26 12.7 0.226
90 × 760 0.10 × 0.071 24 9.6 0.242
100 × 850 0.10 × 0.063 22 10 0.226
130 × 1500 0.063 × 0.036 21 18.6 0.135
100 × 760 0.10 × 0.071 20 7.4 0.242
130 × 1200 0.071 × 0.045 18 12 0.161
130 × 1100 0.071 × 0.05 17 9.4 0.171
150 × 1400 0.063 × 0.04 15 11.4 0.143
160 × 1500 0.063 × 0.036 12.4 0.135
165 × 1500 0.063 × 0.036 14 11.4
174 × 1700 0.063 × 0.032 13 12.9 0.127
165 × 1400 0.063 × 0.04 8.8 0.143
174 × 1400 0.063 × 0.04 11 7.4
203 × 1600 0.05 × 0.032 10 9.3 0.114
A drawing of the twill dutch weave wove wire cloth.
Twill dutch weave woven wire cloth drawing.

A piece of stainless steel filter mesh panel with twill dutch weave.
Twill dutch weave woven wire cloth is widely used as filter mesh panel.

Reverse dutch weave woven wire cloth
Reverse dutch weave woven wire cloth has finer wire diameter in warp wire and coarser wire diameter in weft wire. and the mesh count in the warp wire is larger than the weft wire.

It is the basic filter materials for pharmacy, food, medicine, chemical and other industries.

Reverse Dutch Weave Wire Cloth Specification
Mesh Count Warp × Weft Wire Dia. mm Warp × Weft Wire Dia. inch Warp × Weft Open Area % Micron Rating
63 × 18 0.4000 × 0.6000 0.0157 × 0.0236 60 220
107 × 20 0.2400 × 0.6000 0.0094 × 0.0236 58 210
170 × 40 0.2000 × 0.4500 0.0079 × 0.0177 58 130
132 × 32 0.2000 × 0.4000 0.0079 × 0.0157 55 105
171 × 46 0.1500 × 0.3000 0.0059 × 0.0118 54 85
290 × 75 0.0900 × 0.2000 0.0035 × 0.0079 53 55
615 × 102 0.0400 × 0.1600 0.0157 × 0.0063 41 42
615 × 130 0.0400 × 0.1300 0.0157 × 0.0051 49 22
720 × 150 0.0360 × 0.1000 0.0014 × 0.0039 54 17